The introduction of our new Avante smart eye opens unlimited possibilities to an extensive range of IP monitoring applications.
Responding to the growing demand for a cost-effective and easy-to-use network camera, the Avante smart eye offers a solution for a broad range of remote monitoring applications such as residential, retail, office, manufacturing, as well as web casting.
The Avante smart eye uses MPEG-4 and MJPEG compression formats to provide smooth video and audio streaming to DSL, CATV and other broadband network environments. Thanks to high compression ratio of the MPEG-4 format, the Avante Smart camera can achieve a high frame rate of up to 30 fps, even under limited bandwidth, over the Internet.
With its built-in web server, images can be stored, viewed or managed from a PC running a standard web browser. Connectivity to the Avante Smartboxx is not required as the Smart Eye Camera operates on Internet only. The Avante smart eye also features audio capability with a built-in microphone.
Avante smart eye can be controlled remotely on your smartphone (smart eye live software) and from any PC or laptop, over the internet. Its easy installation procedure and intuitive web-based interface offers simple integration with your WiFi /LAN network.
Avante smart eye live software for smartphones allows the user with one-click to instantly and remotely view any Sony, Panasonic, Lorex or Avante smart eye camera’s live video and audio stream, where possible, on their device. The software is easy to install, simply requiring minimal data about the camera’s IP address on your WiFi network. It uses the full screen resolution of the device to broadcast the best possible video and audio!
802.11B/G WIRELESS LAN
The Avante smart eye is designed to not only work with your existing wired network and also can be compatible with standard 802.11b/g wireless devices. This allows the flexibility to install and operate the Avante smart eye without running network wire, utilizing SSID filtering, powerful 64/128 bit WEP and new security standard WPA encryption helps to protect your wireless network from illegal intrusion. Avante smart eye can work compatibly with 802.11b and 802.11g modes.
DUAL CODE MPEG4 AND MJPEG
The Avante smart eye utilizes the MPEG-4 and MJPEG compression format that achieves high compression ratios, allowing smooth moving images to be streamed over a wide range of bandwidths. Due to its high-compression ratios, users can monitor high-quality moving images with low delay even at low bandwidths. The image size can be selected according to the network environment and application requirements. Image size can be selected from three modes: 640 x 480, 320 x 240,and 160 x 120.
SNAPSHOT AND RECORDING
You can capture still images or record.
* In order to achieve the maximum frame rate, adequate PC processing power and network bandwidth are required.
ALL-IN-ONE NETWORK CAMERA
The Avante smart eye incorporates a 1/6-type CMOS sensor, built-in microphone, and 100 Base- TX/10Base-T (RJ-45) network nterface in a compact and stylish body. With its built-in web server, the Avante smart eye allows users to monitor images and manage the camera on a PC running a standard web browser; additional software is not needed.
The Avante smart eye is equipped with a built-in motion detection function that can generate an alarm trigger various actions. Motion detection can be turned on via schedule on a PC or instantly by Arming view 724Live software ICON on your mobile device. Unlike conventional activity detection, the Avante Smart Camera uses vector information to detect motion, achieving robustness against noise components.
HIGH FRAME RATE
The Avante smart eye produces images with a maximum frame rate of 30 fps* at 640 x 480 size in MPEG-4 modes, allowing clear and smooth images to be viewed. The frame rate can be fixed or set to a variable rate that adjusts to the available bandwidth.
No need to install a driver to use the Avante smart eye. Setup CD-ROM includes the Camera Setup software, User’s Manual and Quick Guide. Insert the Setup CD-ROM and auto run program starts the application automatically. With industry standard automatic configuration-UPnP(Universal Plug and Play), PC will search and connect to your camera automatically without any complicated setup. Once connected, using a simple Web browser, just enter in your free, permanent Web address which comes with the Avante smart eye and you can see the camera. The Avante smart eye can be either wallmounted or ceiling-mounted with the fixing plate or placed on a desktop using the supplied camera stand, providing flexible installation to meet your specific needs.